Phaser 6128MFP Service Manual 4-51
General Troubleshooting
Drum Erase Lamp (C, M, Y)
Install the safety interlock override to provide power to the device under test.
1. Enter Service Diagnostics (page 4-4).
2. Open the Front Cover.
3. Remove the Imaging Unit (page 8-8).
4. Perform the Drum Erase Lamp YMC test: Engine Diag > Motor Test > Drum
Erase Lamp YMC (DO-3f).
5. Verify that the Lamps are operating.
7. Press the Stop button to stop the Drum Erase Lamp YMC test.
To Next Page
Loading...
