10-4 Phaser 6128MFP Service Manual
Wiring
291 4 G-109 Connects Dispense Assy (Side Cover Switch) and
HARNESS ASSY SIDE SW
311 4 G-111 Connects Dispense Assy (Connector CRUM Y) and
HARNESS ASSY TONER CRUM
312 4 G-110 Connects Dispense Assy (Connector CRUM M) and
HARNESS ASSY TONER CRUM
313 4 G-110 Connects Dispense Assy (Connector CRUM C) and
HARNESS ASSY TONER CRUM
314 4 G-109 Connects Dispense Assy (Connector CRUM K) and
HARNESS ASSY TONER CRUM
403 3 G-137 Connects I/P Board and HARNESS ASSY A-OP-ESS
411 2 E-124 Connects Laser Unit and HARNESS ASSY ROS RE
412 2 E-124 Connects Laser Unit and HARNESS ASSY ROS
VIDEO
422 1 H-151 Connects PHD UNIT ( EEPROM PHD) and HARNESS
ASSY PHD XPRO
482 3 B-137 Connects BREAKER GFI and HARNESS ASSY SW
PWR
484 3 B-138 Connects BREAKER GFI and HARNESS ASSY GFI
GND
501 3 E-143 Connects LVPS and HARNESS ASSY LVPS MAIN
502 3 E-143 Connects LVPS and HARNESS ASSY LVPS MAIN
503 3 E-143 Connects LVPS and Fan
504 3 E-143 Connects LVPS and HARNESS ASSY LVPS MAIN
801 3 G-138 Connects I/P Board and Fax Board
802 3 G-136 Connects I/P Board and HARNESS ASSY IIT POWER
901 3 G-136 Connects I/P Board and HARNESS ASSY ESS
902 3 G-137 Connects I/P Board and HARNESS ASSY ESS VIDEO
1001 3 G-136 Connects I/P Board and SCANNER ASSY (PCB CCD)
1002 3 G-136 Connects I/P Board and SCANNER ASSY (Scanner
Motor)
1003 3 G-136 Connects I/P Board and SCANNER ASSY (ADF Assy)
2811 4 D-108 Connects ADC Sensor and HARNESS ASSY CTD
SNR2 (TRANSFER BELT)
5041 4 H-108 Not Connected (Used in production process only)
5301 2 D-127 Connects HARNESS ASSY A-OP-OPP and HARNESS
ASSY A-OP-ESS
Print Engine Plug/Jack Designators
P/J Map Coordiates Description
To Next Page
Loading...
