Xirrus XR Series User Manual

Wireless Access Point
104 Viewing Status on the Wireless AP
Admin History
It is useful to know who else is currently logged in to an AP while you're
configuring it, or who has logged in since the AP booted. This status-only
window shows you all administrator logins to the AP that have occurred since the
last reboot. To determine who is currently logged in, check which entries say
active in the Logout Time column.
Figure 50. Admin Login History
Network Status Windows
The following Network Status windows are available:
 Network — displays a summary of network interface settings.
 Network Map — displays information about this AP and neighboring
APs that have been detected.
 Spanning Tree Status — displays the spanning tree status of network
links on this AP.
 Routing Table — displays information about routing on this AP.
 ARP Table — displays information about Address Resolution Protocol on
this AP.
 DHCP Leases — displays information about IP addresses (leases) that the
AP has allocated to client stations.
 Connection Tracking/NAT — lists connections that have been established
for client stations.
 CDP List — lists neighboring network devices using Cisco Discovery
Protocol.
 LLDP List — lists devices on the AP’s network that support the Link
Layer Discovery Protocol (LLDP).

Xirrus XR Series Specifications

General

Brand	Xirrus
Model	XR Series
Category	Wireless Access Point
Language	English