Xirrus XR Series User Manual

Wireless Access Point
490 The Command Line Interface
syslog
The syslog command [MyAP(config-syslog)#] is used to enable, disable, or
configure the Syslog server.
Command Description
console Enable or disable the display of Syslog messages
on the console, and set the level to be displayed.
All messages at this level and lower (i.e., more
severe) will be displayed.
FORMAT:
syslog console [on/off] level [0-7]
disable
off
Disable the Syslog server.
FORMAT:
syslog disable
email Disable the Syslog server.
FORMAT:
syslog email from [email-from-address] 
level [0-7]
password [email-acct-password]
server [email-server-IPaddr] 
test [test-msg-text]
to-list [recipient-email-addresses]
user [email-acct-username]
enable
on
Enable the Syslog server.
FORMAT:
syslog enable
local-file Set the size and/or severity level (all messages at
this level and lower will be logged).
FORMAT:
syslog local-file size [1-500] level [0-7]
no Disable the selected feature.
FORMAT:
syslog no [feature]

Xirrus XR Series Specifications

General

Brand	Xirrus
Model	XR Series
Category	Wireless Access Point
Language	English