Xirrus XR Series

Wireless Access Point
472 The Command Line Interface
location-reporting
The location-reporting command [MyAP(config)# location-reporting] is used to
configure Location Server settings. See also, “Location” on page 191.
Command Description
cust-key Set Location Server customer key.
FORMAT:
location-reporting cust-key enc <loc-server-
customer-key>
disable
off
Disable location-reporting.
FORMAT:
location-reporting disable
enable
on
Enable location-reporting.
FORMAT:
location-reporting enable
period Set Location Server reporting period (seconds).
FORMAT:
location-reporting period <#-seconds>
url Set URL of Location Server.
FORMAT:
location-reporting url <loc-server-URL>