Wireless Access Point
110 Viewing Status on the Wireless AP
Routing Table
This status-only window lists the entries in the AP’s routing table. The table
provides the AP with instructions for sending each packet to its next hop on its
route across the network.
Figure 54. Routing Table
See Also
VLANs
Configuring VLANs on an Open SSID
ARP Table
This status-only window lists the entries in the AP’s ARP table. For a device with
a given IP address, this table lists the device’s MAC address. It also shows the AP
interface through which this device may be reached. The table typically includes
devices that are on the same local area network segment as the AP.
Figure 55. ARP Table
See Also
Routing Table
ARP Filtering
To Next Page
Loading...
Need help?
General
