Wireless Access Point
20 Introduction
802.11a/b/g/n (monitor only)
Delivers 360° wireless coverage, with 2 dBi of gain.
Non-Overlapping Channels
Complete use of non-overlapping channels limits interference and delivers
maximum capacity. On the XR-7630, up to 16 non-overlapping channels are fully
utilized across the 5GHz and 2.4GHz spectrums.
SDMA Optimization
SDMA (Spatial Division Multiple Access) technology provides full 360° coverage
while allowing independent channel and power output customization. Also
supports fast inter-zone handoffs for time-sensitive applications and roaming.
Fast Roaming
Fast roaming utilizes the Xirrus Roaming Protocol ensuring fast and seamless
roaming capabilities between IAPs or APs at both Layer 2 and Layer 3.
Ease of Deployment
The Xirrus XMS and Mobilize services simplify and speed deployment of the
wireless network by automatically setting up each AP’s license, software image,
and initial configuration. When the AP is installed and has Internet connectivity,
it contacts Xirrus, which performs these initialization tasks.
Powerful Management
The XMS offers real time monitoring and management capabilities for the
wireless network.
Secure Wireless Access
Multiple layers of authentication and encryption ensure secure data
transmissions. The Wireless AP is 802.11i compliant with line-rate encryption
support for 40 and 128 bit WEP, WPA and WPA2 with TKIP and AES encryption.
Authentication is provided via 802.1x, including PEAP, EAP-TLS, EAP-TTLS,
EAP-SIM, EAP-GTC, EAP-AKA, EAP-AKA-Prime, and Lightweight Extensible
Authentication Protocol (LEAP) passthrough. Intrusion detection and prevention
provide proactive monitoring of the environment for threats.
To Next Page
Loading...
Need help?
General
