Xirrus XR Series User Manual

Wireless Access Point
202 Configuring the Wireless AP
11. DNS Servers (1 to 3): Enter the IP address of the primary DNS server,
secondary DNS server and tertiary DNS server. These DNS server
addresses will be passed to stations when they associate, along with the
assigned IP address. Note that if you leave these blank, no DNS
information is sent to the stations. DHCP will not default to sending the
DNS servers that are configured in DNS Settings. See also, “DNS
Settings” on page 180.
12. Click the Save button if you wish to make your changes permanent.
See Also
DHCP Leases
DNS Settings
Network Map
Proxy Services
If your organization uses a proxy server such as Blue Coat or Netbox Blue to
control Internet access, use this page to configure proxy forwarding on the AP.
Options are provided for proxying user traffic and AP management traffic.
Proxy services for user traffic are discussed in the following topics:
 “About Proxy Forwarding” on page 203
 “Proxy Forwarding for HTTPS” on page 204
 “Summary of Proxy Forwarding Behavior on the AP” on page 205
 “Configuring Proxy Forwarding on Clients for HTTPS” on page 206
 “Procedure for Configuring Proxy Forwarding on the AP” on page 210
Proxy services for management traffic are discussed in the following topics:
 “About Using a Proxy Client for Management Traffic” on page 210
 “Procedure for Configuring Proxy Client for Management Traffic” on
page 211

XR-520/XR-1000 Series APs do not support HTTP/S proxy. You will
receive an error message if you attempt to configure this feature.

Xirrus XR Series Specifications

General

Brand	Xirrus
Model	XR Series
Category	Wireless Access Point
Language	English