Wireless Access Point
270 Configuring the Wireless AP
Understanding QoS Priority on the Wireless AP
Figure 150. Four Traffic Classes
The Wireless AP’s Quality of Service Priority feature (QoS) allows traffic to be
prioritized according to your requirements. For example, you typically assign the
highest priority to voice traffic, since this type of traffic requires delay to be under
10 ms. The AP has four separate queues for handling wireless traffic at different
priorities, and thus it supports four traffic classes (QoS levels).
For a complete discussion of implementing Voice over Wi-Fi on the AP, see
the Voice over Wireless Application Note in the Xirrus Resource
Center.
To Next Page
Loading...
Need help?
General
