Wireless Access Point
346 Configuring the Wireless AP
Global Settings .11n
This window allows you to establish global 802.11n IAP settings. These settings
include enabling or disabling 802.11n mode for the entire AP, specifying the
number of transmit and receive chains (data stream) used for spatial
multiplexing, setting a short or standard guard interval, auto-configuring channel
bonding, and specifying whether auto-configured channel bonding will be static
or dynamic.
Before changing your settings for 802.11n, please read the discussion in “About
IEEE 802.11ac” on page 42.
Figure 173. Global Settings .11n
To Next Page
Loading...
Need help?
General
