Wireless Access Point
40 Installing the Wireless AP
Allows the AP to come up for the first time and not interfere with existing
equipment that may be already running, thereby limiting co-channel
interference.
More accurately tunes the RF characteristics of a wireless installation than
manual configuration since the radios themselves are scanning the
environment from their physical location.
May be configured to run periodically.
To set up the automatic channel selection feature, go to “Advanced RF Settings”
on page 357.
Manual Channel Selection
You can manually assign channels on a per radio basis, though manual selection
is not recommended (and not necessary).
Figure 17. Allocating Channels Manually
To avoid co-channel interference, do not select adjacent channels for radios
that are physically next to each other.
Maintain channel separation
To Next Page
Loading...
Need help?
General
