Wireless Access Point
114 Viewing Status on the Wireless AP
Network assurance must be enabled on the AP in order to perform these
connectivity tests and display this information. See “Management Control” on
page 237.
See Also
Management Control
Undefined VLANs
This status-only window lists VLANs that are detected on the AP’s trunk ports
(i.e., wired ports), but have not been configured on the AP. See “VLANs” on
page 213.
Figure 61. Undefined VLANs
This feature alerts you to the fact that an 802.1Q trunk to the AP has VLANs that
are not being properly handled on the AP. To reduce unnecessary traffic, only
VLANs that are actually needed on the AP should normally be on the trunk, e.g.,
the management VLAN and SSID VLANs. In some cases such as multicast
forwarding for Apple Bonjour you may want to extend other VLANs to the AP, in
order to forward Bonjour or other multicast packets (see “Advanced Traffic
Optimization” on page 323).
See Also
VLANs
To Next Page
Loading...
Need help?
General
