Wireless Access Point
Configuring the Wireless AP 257
g. Secondary Shared Secret / Verify Secret: If using a secondary
accounting server, enter the shared secret that it will be using, then re-
enter the shared secret to verify that you typed it correctly.
6. Click the Save button if you wish to make your changes permanent.
See Also
Admin Management
Global Settings
Internal Radius
Access Control List
Management Control
Security
Understanding Groups
Internal Radius
This window allows you to define the parameters for the AP’s internal RADIUS
server for user authentication. However, the internal RADIUS server will only
authenticate wireless clients that want to associate to the AP. This can be useful if
an external RADIUS server is not available. To set up the internal RADIUS server,
you must choose Internal Radius as the Authentication Server Mode in “Global
Settings” on page 249
.
Figure 144. Internal RADIUS Server
To Next Page
Loading...
Need help?
General
