Xirrus XR Series User Manual

Wireless Access Point
Configuring the Wireless AP 283
The lower part of the window contains a few sections of additional settings to
configure for the currently selected SSID, depending on the values chosen for the
settings described above.
 “SSID Limits and Scheduling” on page 283
 “Web Page Redirect (Captive Portal) Configuration” on page 286
 “Whitelist Configuration for Web Page Redirect” on page 292
 “WPA Configuration” on page 296
 “Authentication Service Configuration” on page 296
SSID Limits and Scheduling
See “Group Limits” on page 308 for a discussion of the interaction of SSID limits
and group limits. To eliminate confusion, we recommend that you configure one
set of limits or the other, but not both.
18. Stations: Enter the maximum number of stations allowed on this SSID.
This step is optional. Note that the IAPs - Global Settings window also
has a station limit option — Max Station Association per IAP, and the
windows for Global Settings .11an and Global Settings .11bgn also have
Max Stations settings. If multiple station limits are set, all will be
enforced. As soon as any limit is reached, no new stations can associate
until some other station has terminated its association.
19. Overall Traffic: Choose Unlimited if you do not want to place a
restriction on the traffic for this SSID, or enter a value in the Packets/Sec
field to force a traffic restriction.
20. Traffic per Station: Choose Unlimited if you do not want to place a
restriction on the traffic per station for this SSID, or enter a value in the
Packets/Sec field or the Kbps field to force a traffic restriction. If you set
both values, the AP will enforce the limit it reaches first.

Note that you cannot use MDM and WPR on the same SSID.

Xirrus XR Series Specifications

General

Brand	Xirrus
Model	XR Series
Category	Wireless Access Point
Language	English