Wireless Access Point
529
• When no stations are associated to the AP
• Midnight
Radio Assurance Options
If the monitor detects a problem with an AP radio as described above, it will take
action according to the preference that you have specified in the Radio Assurance
Mode setting on the Advanced RF Settings window (see Step 2):
Failure alerts only — The AP will issue alerts in the Syslog, but will not
initiate repairs or reboots.
Failure alerts & repairs, but no reboots — The AP will issue alerts and
perform resets of the PHY and MAC as described above.
Failure alerts & repairs & reboots if needed — The AP will issue alerts,
perform resets of the PHY and MAC, and schedule reboots as described
above.
Disabled — Disable loopback tests (no self-monitoring occurs). Loopback
tests are disabled by default.
To Next Page
Loading...
Need help?
General
