Xirrus XR Series User Manual

Wireless Access Point
Viewing Status on the Wireless AP 107
 (IAP) Up: Informs you how many IAPs are currently up and running. To
enable or disable all IAPs, go to “Express Setup” on page 163. To enable
or disable individual IAPs, go to “IAP Settings” on page 312.
 SSID: Informs you how many SSIDs have been assigned for the AP. To
assign an SSID, go to “SSID Management” on page 276.
 (SSID) On: Informs you how many SSIDs are enabled. To enable or
disable SSIDs, go to “SSID Management” on page 276.
 In Range: Informs you whether the AP is within wireless range of
another Wireless AP.
 Fast Roam: Informs you whether or not the Xirrus fast roaming feature is
enabled. This feature utilizes the Xirrus Roaming Protocol (XRP) ensuring
fast and seamless roaming capabilities between IAPs or APs at both Layer
2 and Layer 3. To enable or disable fast roaming, go to “Global Settings”
on page 318.
 Uptime (D:H:M): Informs you how long the AP has been up and running
(in Days, Hours and Minutes).
To see additional information, select from the following checkboxes at the bottom
of the page. This will show the columns described below.
Hardware
 Model: The model number of each AP, plus the amount of RAM memory
and the speed of the processor.
 Serial: Displays the serial number of each AP.
License
 License: The license key of each AP.
 Licensed Features: Lists the features enabled by the key.
Software (enabled by default)
 Enable/disable display of the AP OS column.
Firmware
 Boot Loader: The software version number of the boot loader on each AP.

Xirrus XR Series Specifications

General

Brand	Xirrus
Model	XR Series
Category	Wireless Access Point
Language	English