Wireless Access Point
392 Configuring the Wireless AP
Custom Application Control List
9. Create New List: Enter a name for the new Application Control list in this
field, followed by the ENTER key. The new list is added to the
Application Control Lists table, and this list may be used to create filters.
You may create up to 15 lists (on the XR-520, the limits are reduced to 8
lists and 125 applications per list).
Click in the field for the new Application Control list to display a list of
applications. Add the desired applications to this list, one at a time. Up to
250 applications may be added. This field also provides a search feature—
type in a string, and the list will display only the choices whose names
contain that string in any position. Click the Apply button on the right
when done adding applications to this list.
Click Reset if you want to remove all of the entries from this field, i.e., to
empty it. Click Remove to delete this Application Control list. You may
use Reset All Lists on the bottom to delete all lists.
10. Click the Save button if you wish to make your changes permanent.
11. Click a filter list to go to the Filter Management window to create and
manage the filters that belong to this list.
To Next Page
Loading...
Need help?
General
