Wireless Access Point
444 The Command Line Interface
country-list Display countries that the AP can be set to
support.
date-time Display date and time settings summary.
dhcp-leases Display IP addresses (leases) assigned to stations
by the DHCP server.
dhcp-pool Display internal DHCP server settings summary
information.
diff Display the difference between configurations.
dns Display DNS summary information.
env-ctrl Display the environmental controller status for the
outdoor enclosure.
error-numbers Display the detailed error number in error
messages.
ethernet Display Ethernet interface summary information.
external-radius Display summary information for the external
RADIUS server settings.
factory-config Display the AP factory configuration information.
filter Display filter information.
filter-list Filter list information.
group User Group summary.
iap Display IAP configuration information.
ids-event-log IDS event log.
ids-stats IDS statistics
internal-radius Display the users defined for the embedded
RADIUS server.
intrude-detect Intrusion detection information.
Command Description
To Next Page
Loading...
Need help?
General
