Wireless Access Point
478 The Command Line Interface
no
The no command [MyAP(config)# no] is used to disable a selected element or set
the element to its default value.
Command Description
2.4GHz Disable all 2.4GHz IAPs.
5GHz Disable all 5GHz IAPs.
acl Disable the Access Control List.
FORMAT:
no acl
clear-text Disable entry and display of passwords and
secrets in the clear.
gig1 Disable gig1.
gig2 Disable gig2.
https Disable https access.
FORMAT:
no https
intrude-detect Disable intrusion detection.
FORMAT:
no intrude-detect
management Disable management on all Ethernet interfaces.
FORMAT:
no management
more Disable terminal pagination.
FORMAT:
no more
ntp Disable the NTP server.
FORMAT:
no ntp
To Next Page
Loading...
