Xirrus XR Series User Manual

Wireless Access Point
26 Introduction
firmware, uploading and downloading configurations and other files,
using diagnostic tools, and resetting the AP to its factory defaults.
 The Command Line Interface
Includes the commands and the command structure used by the Wireless
AP’s Command Line Interface (CLI), and provides a procedure for
establishing a Telnet connection to the AP. This chapter also includes
some sample key configuration tasks using the CLI.
 Appendix A: Quick Reference Guide
Contains the product’s factory default settings.
 Appendix B: FAQ and Special Topics
Offers guidance to resolve technical issues, including general hints and
tips to enhance your product experience, and a procedure for isolating
problems within an AP-enabled wireless network. Also includes
Frequently Asked Questions (FAQs) and Xirrus contact information.
 Appendix D: Notices (XR-1000 to XR-6000 Indoor Models)
Contains the legal notices, licensing, and compliance statements for the
AP. Please read this section carefully.
 Appendix C: Notices (XD4 and XR500/600 Series Only)
Contains the legal notices, licensing, and compliance statements for the
XR500 Series Access Points. Please read this section carefully if you are
using these models.
 Appendix E: Medical Usage Notices
Provides compliance information for Xirrus devices with respect to the
requirements of IEC 60601-1-2.
 Appendix F: Auditing PCI DSS
Discusses using AP features to assist in meeting security standards for
PCI DSS audits.
 Appendix G: Implementing FIPS Security
Discusses meeting FIPS security standards with Xirrus devices.

Xirrus XR Series Specifications

General

Brand	Xirrus
Model	XR Series
Category	Wireless Access Point
Language	English