Wireless Access Point
494 The Command Line Interface
about Wi-Fi RFID tags sent on the designated channels. See also “Wi-Fi Tag” on
page 190.
Command Description
disable
off
Disable wifi-tag.
FORMAT:
wifi-tag disable
enable
on
Enable wifi-tag.
FORMAT:
wifi-tag enable
refresh Disable and enable WiFi tag.
server Set hostname or IP address of the tag server.
tag-channel-bg Set an 802.11b or g channel for listening for tags.
FORMAT:
wifi-tag tag-channel-bg <1-255>
udp-port Set the UDP port which a tagging server will use
to query the AP for tagging information.
FORMAT:
wifi-tag udp-port <1025-65535>
To Next Page
Loading...
