ABB AC500 V3 - Page 494

No. Name Value Internal value Internal
value, type
Default
1 Channel con-
figuration
see below
Ä Table 97 “C
hannel config-
uration
3
)”
on page 494
see below
Ä Table 97 “C
hannel config-
uration
3
)”
on page 494
Byte see below
Ä Table 97 “C
hannel config-
uration
3
)”
on page 494
2 Channel mon-
itoring
see below
Ä Table 98 “C
hannel moni-
toring
4
)”
on page 494
see below
Ä Table 98 “C
hannel moni-
toring
4
)”
on page 494*
8)
Byte see below
Ä Table 98 “C
hannel moni-
toring
4
)”
on page 494
3 Substitute
value
Ä Table 99 “S
ubstitute
value”
on page 495
0...65535 0...
0xffff
Word 0
No. Name Internal value, type
1 Channel configuration
see table
3
)
Byte
2 Channel monitoring
see table
4
)
Byte
Table 97: Channel configuration
3
)
Internal value Operating modes of the analog outputs,
individually configurable
0 Unused (default)
128 Analog output -10 V...+10 V
129 Analog output 0 mA...20 mA (not with the
channels 4...7 and 12...15)
130 Analog output 4 mA...20 mA (not with the
channels 4...7 and 12...15)
Table 98: Channel monitoring
4
)
Internal value Monitoring
0 Plausibility, open-circuit (broken wire) and
short circuit (default)
1 Open-circuit (broken wire) and short circuit
2 Plausibility
3 No monitoring
Output channels
0 and 8 (2 chan-
nels, AO523)
Output channels
1...7 and 9...15
(14 channels,
AO523)
Device specifications
I/O modules > Analog I/O modules
2022/01/313ADR010278, 3, en_US494