Processor module PM5630 PM5650 PM5670 PM5675
TB5640-2ETH - 4 slots 4 slots 4 slots
TB5660-2ETH - -
6 slots
1
) 6 slots
1
)
Remarks:
The slots can be used for connecting communication modules or AC500-S modules. Note that
only one AC500-S module can be connected at one terminal base.
1
) PM567x must have an index ≥ C0.
The following figure shows the TB5620-2ETH as example.
1 I/O bus (10-pin, female) to connect the I/O terminal units
2 One available slot for the processor module
3 Slots for communication modules
4 Interface for CAN (5-pin terminal block, removable)
5 Power supply (5-pin terminal block, removable)
6 Serial interface COM1 (9-pin terminal block, removable)
7 RJ45 female connector for Ethernet connection
8 Holes for screw mounting
Terminal bases (AC500 standard) > TB56xx for AC500 V3 products
2022/01/31 3ADR010278, 3, en_US 5
To Next Page
Loading...
