ABB AC500 V3 - Page 950

NOTICE!
Removal of the micro memory card
Do not remove the micro memory card when it is working!
AC500 V3: Remove the micro memory card with micro memory card adapter
only when no black square ( ) is shown next to MC in the display.
AC500-eCo V3: Remove the micro memory card only when the MC LED is not
blinking.
Otherwise the micro memory card and/or files on it might get corrupted and/or
normal PLC operation might be disturbed.
Fig. 180: Remove micro memory card from PM56xx
1 Micro memory card
2 Micro memory card adapter
3 Memory card slot
1. To remove the micro memory card adapter with the integrated micro memory card, push
on the micro memory card adapter until it moves forward.
2. By this, the micro memory card adapter is unlocked and can be removed.
Remove the
micro memory
card
AC500 V3
System assembly, construction and connection
AC500-eCo > Handling of accessories
2022/01/313ADR010278, 3, en_US950