1 Micro memory card slot cover
2 Micro memory card
3 Micro memory card slot
1. Open the micro memory card slot cover by turning it upwards.
2. Micro memory card can be removed from the micro memory card slot by gripping and
pulling with two fingers.
3. Close the micro memory card slot cover by turning it downwards.
Parameter Value
Memory capacity 8 GB
Total bytes written (TBW) On request
Data retention
at beginning 10 years at 40 °C
when number of write processes has been
90 % of lifetime of each cell
1 year at 40 °C
Write protect switch
Micro memory card No
Micro memory card adapter Yes
Weight 0.25 g
Dimensions 15 mm x 11 mm x 0.7 mm
It is not possible to use 100 % of a device's memory space. About 10 % of the
total available space must remain unused at any time to maintain normal device
operation.
Further information on using the micro memory card in AC500 PLCs is provided in the chapter .
Part no. Description Product life cycle phase *)
1SAP 180 100 R0002 MC5102, micro memory
card with TA5350-AD micro
memory card adapter
Active
AC500-eCo V3
Technical data
Ordering data
System assembly, construction and connection
AC500-eCo > Handling of accessories
2022/01/31 3ADR010278, 3, en_US 951
To Next Page
Loading...
