STATus Subsystem 11
N1911A/1912A P-Series Power Meters Programming Guide 481
STATus:OPERation:TRIGger[:SUMMary]
The operation status trigger summary register set contains information on
the trigger status of the power meter.
The following bits in these registers are used by the power meter:
Syntax
Bit Number Decimal
Weight
Definition
0 - Not used
1 2 Channel A TRIGger Status
2 4 Channel B TRIGger Status (N1912A only)
3-15 - Not used
To Next Page
Loading...
