15 SERVice Subsystem
712 N1911A/1912A P-Series Power Meters Programming Guide
SERVice:SENSor[1]|2:CDATe?
This query returns the calibration date in P- Series, E- Series sensors and
N8480 Series sensors. Calibration date information is stored in the
sensor’s EEPROM.
Syntax
Example
Error Messages
• If no power sensor is connected, error –241 “Hardware missing” occurs.
• If a a sensor other than a P- Series, N8480 Series or E- Series power
sensor is connected, error –241 “Hardware missing” occurs.
SERV:SENS2:CDATe? This query returns the calibration date of
the P- Series sensor, E- Series sensor or
N8480 Series sensor connected to Channel
B.
To Next Page
Loading...
