STATus Subsystem 11
N1911A/1912A P-Series Power Meters Programming Guide 483
STATus:PRESet
PRESet sets a number of the status registers to their preset values as
shown below - all other registers are unaffected. Bit 15 is always 0.
Syntax
Register Filter/Enable PRESet Value
OPERational ENABle all zeros
PTR all ones
NTR all zeros
QUEStionable ENABle all zeros
PTR all ones
NTR all zeros
All Others ENABle all ones
PTR all ones
NTR all zeros
To Next Page
Loading...
