Agilent Technologies N1911A

SENSe Subsystem 10
N1911A/1912A P-Series Power Meters Programming Guide 405
[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe <boolean>
This command is used to enable/disable a channel offset for the power
meter setup. The [SENSe[1]]|SENSe2:CORRection:GAIN2[:INPut]
[:MAGNitude] command is used to enter the loss/gain value.
Syntax
Example
Reset Condition
On reset, channel offsets are disabled.
CORR:GAIN2:STAT ON This command enables a channel offset on
Channel A.
SENS
1
:GAIN2
CORR
SENS2
:
:STAT
0|OFF
1|ON
Space
?