3CALCulate Subsystem
186 N1911A/1912A P-Series Power Meters Programming Guide
CALCulate[1]|2|3|4:LIMit:STATe <boolean>
This command enables/disables the test limits for the specified window.
Syntax
Example
Reset Condition
On reset, limit checking is disabled.
Query
CALCulate[1]|2|3|4:LIMit:STATe?
The query enters 1 or 0 into the output buffer indicating the status of the
limits testing feature for the specified window/measurement.
• 1 is returned when limits testing is enabled
• 0 is returned when limits testing is disabled
CALC2:LIM:STAT 1 This command enables the limit checking
function for the lower window upper
measurement.
0|OFF
1|ON
Space
?
:LIM
:STAT
CALC
1
2
3
4
To Next Page
Loading...
Need help?
General
