Agilent Technologies N1911A Programming Guide

3CALCulate Subsystem
168 N1911A/1912A P-Series Power Meters Programming Guide
CALCulate[1]|2|3|4:GAIN Commands
These commands are used to enter and enable a display offset on the
specified window/measurement. The display offset is applied to the
measurement signal after any math calculation.
The following commands are detailed in this section:
CALCulate[1]|2|3|4:GAIN[:MAGNitude] <numeric value>
CALCulate[1]|2|3|4:GAIN:STATe <boolean>

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English