Agilent Technologies N1911A

UNIT Subsystem 16
N1911A/1912A P-Series Power Meters Programming Guide 735
UNIT[1]|2|3|4:POWer:RATio <ratio_unit>
This command sets the window/measurement ratio units.
• UNIT1:POWer:RATio sets the ratio measurement units for the upper
window/upper measurement.
• UNIT2:POWer:RATio sets the ratio measurement units for the lower
window/upper measurement.
• UNIT3:POWer:RATio sets the ratio measurement units for the upper
window/lower measurement.
• UNIT4:POWer:RATio sets the ratio measurement units for the lower
window/lower measurement.
Syntax
Parameters
Item Description/Default Range of Values
ratio_unit The ratio measurement unit.
• The default unit is DB
DB
PCT
:RAT
:POW
ratio_unit
Space
?
UNIT
1
2
3
4