9 PSTatistic Subsystem
342 N1911A/1912A P-Series Power Meters Programming Guide
PSTatistic[1]|2:CCDF:STORe:REFerence
This command is used to store Channel A or Channel B as a reference
trace for CCDF graph window.
Syntax
Example
The trace will be saved as reference trace in volatile RAM.
This command is only applicable when P-Series sensors are present and the following
conditions are met:
• Free-run acquisition mode is selected
• NORMal or DOUBle measurement speed setting is chosen
• Expanded window is enabled (not full CCDF screen window)
PST:CCDF:STOR:REF This command saves the Channel A trace
as reference trace.
PST2:CCDF:STOR:REF This command saves the Channel B trace
as reference trace.
To Next Page
Loading...
Need help?
General
