Agilent Technologies N1911A Programming Guide

SENSe Subsystem 10
N1911A/1912A P-Series Power Meters Programming Guide 455
SENSe[1]|2:TRACe:LIMit:LOWer <numeric_value>
This command sets the lower scale limit of the trace for the specified
channel.
The units used are dependent on the current setting of SENS:TRAC:UNIT
as shown in Table 10- 23.
Tab le 10-23Measurement Units
Syntax
Units:
SENS:TRAC:UNIT
Units:
SENS:TRAC:LIM:LOW
dBm dBm
WW
NOTE
The trace lower scale limit is maintained at a lower power than the upper scale limit which
is adjusted to be slightly greater than the lower scale limit if necessary. Refer to
“SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value>” on page 458 for further information
on setting the trace upper scale limit.
:SENS
1
2
:TRAC
Space
?
numeric_value
DEF
MIN
MAX
MIN
MAX
Space
:LOW
:LIM

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English