Agilent Technologies N1911A

12 SYSTem Subsystem
494 N1911A/1912A P-Series Power Meters Programming Guide
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
<numeric_value>
This command sets the GPIB address of the power meter.
Syntax
Parameters
Example
Item Description/Default Range of Values
numeric_value A numeric value for the address.
• DEF: the default value is 13
• MIN: 0
•MAX: 30
0 to 30
DEF
MIN
MAX
SYST:COMM:GPIB:ADDR 13 This command sets the GPIB address to
13.
SYST
:COMM
:GPIB
:SELF
:ADDR
Space
?
numeric_value
DEF
MIN
MAX
MIN
MAX
Space