13 TRACe Subsystem
616 N1911A/1912A P-Series Power Meters Programming Guide
TRACe[1]|2:DEFine:TRANsition:REFerence <numeric_value>,
<numeric_value>
This command defines the reference levels to be used in the calculation of
transition durations and occurrences. This allows transition measurements
between non- standard reference levels and it is a configuration command
that independent of sensors.
Syntax
Parameters
1
2
:REF
:DEF
:TRAN
?
TRAC
numeric_value
Space
numeric_value
Item Description/Default Range of
Values
numeric_value Reference levels to be used in calculation of transition
durations and occurences
0 to 100
DEF
To Next Page
Loading...
