SERVice Subsystem 15
N1911A/1912A P-Series Power Meters Programming Guide 725
SERVice:SENSor[1]|2:SNUMber?
This query returns the serial number for P- Series, E- Series sensors and
N8480 Series sensors. Serial number information is stored in the sensor’s
EEPROM.
Syntax
Example
Error Messages
• If no sensor is connected, error –241, “Hardware missing” occurs.
• If a a sensor other than a P- Series, N8480 Series or E- Series power
sensor is connected, error –241 “Hardware missing” occurs.
SERV:SENS2:SNUM? This query returns the serial number of
the P- Series, E- Series sensor or N8480
Series sensor connected to Channel B.
To Next Page
Loading...
Need help?
General
