Agilent Technologies N1911A Programming Guide

SENSe Subsystem 10
N1911A/1912A P-Series Power Meters Programming Guide 461
SENSe[1]|2:TRACe:X:SCALe:PDIV <numeric_value>
This command is used to set the X Scale value (per division) for the
selected trace.
Syntax
Parameters
Example
NOTE
This command is only applicable when N192x or E932x sensor is present and trigger
acquisition mode is selected.
Item Description/Default Range of Values
numeric_value The numeric value for X-axis scale. 2 ns to 0.1 s
SENS:TRAC:X:SCAL:PDIV 0.02 This command sets the X Scale value of
Channel A to 0.02 step.
SENS2:TRAC:X:SCAL:PDIV
0.05
This command sets the X Scale value of
Channel B to 0.05 step.
1
2
Space
?
:X
SENS
:TRAC
:SCAL
:PDIV
numeric_value

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English