10 SENSe Subsystem
438 N1911A/1912A P-Series Power Meters Programming Guide
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:OFFSet:TIME
<numeric_value>
This command sets the delay between the delayed trigger point and the
start of the time- gated period (the offset time) for a P- Series sensor or a
E9320 sensors set to NORMal mode. To set an E9320 sensor to NORMal
mode, refer to the command “[SENSe[1]]|SENSe2:DETector:FUNCtion
<character_data>” on page 410.
Syntax
Parameters
Item Description/Default Range of Values
numeric_value The delay between the trigger point and the
start of the time-gated period.
• DEF: the default value is 0 seconds
Units are resolved to 1 ns.
–1 to 1 second
DEF
SENS
1
:TIME
SENS2
:
:OFFS
numeric_value
DEF
Space
SWE
?
1
2
3
4
To Next Page
Loading...
Need help?
General
