Agilent Technologies N1911A Programming Guide

STATus Subsystem 11
N1911A/1912A P-Series Power Meters Programming Guide 475
Operation Register Sets
The following registers contain information which is part of the power
meter’s normal operation. The contents of the individual registers of these
register sets may be accessed by appending the commands listed in
“Status Register Set Commands”.
The following command descriptions detail the SCPI register you require
to control but do not detail the Register Set commands.
The seven Operation Register Sets are:
STATUS:OPERation
STATus:OPERation:CALibrating[:SUMMary]
STATus:OPERation:LLFail[:SUMMary]
STATus:OPERation:MEASuring[:SUMMary]
STATus:OPERation:SENSe[:SUMMary]
STATus:OPERation:TRIGger[:SUMMary]
STATus:OPERation:ULFail[:SUMMary]
Further information on these register sets is provided on the following
pages.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English