Agilent Technologies N1911A

SENSe Subsystem 10
N1911A/1912A P-Series Power Meters Programming Guide 403
[SENSe[1]]|SENSe2:CORRection:FDOFfset|GAIN4[:INPut][:MA
GNitude]?
This command is used to return the frequency dependent offset currently
being applied.
Syntax
Example
Reset Condition
On reset, the frequency dependent offset is not affected.
CORR:GAIN4? This command queries the current
frequency dependent offset being applied
to Channel A.
SENS
1
:GAIN4
CORR
SENS2
:
:FDOFfset
:INP
:MAG
?