291
N1911A/1912A P-Series Power Meters
Programming Guide
Agilent Technologies
8
OUTput Subsystem
OUTPut Subsystem 292
OUTPut:RECorder[1]|2:FEED <data_handle> 293
OUTPut:RECorder[1]|2:LIMit:LOWer <numeric_value> 295
OUTPut:RECorder[1]|2:LIMit:UPPer <numeric_value> 297
OUTPut:RECorder[1]|2:STATe <boolean> 299
OUTPut:ROSCillator[:STATe] <boolean> 301
OUTPut:TRIGger[:STATe] <boolean> 303
This chapter explains how the OUTput command subsystem is used to
switch the POWER REF output on and off.
To Next Page
Loading...
