13 TRACe Subsystem
614 N1911A/1912A P-Series Power Meters Programming Guide
TRACe[1]|2:DEFine:DURation:REFerence<numeric_value>
This command defines the reference levels to be used in the calculation of
pulse durations. This allows pulse duration measurements between
non- standard reference levels. This is a configuration command
independent of the sensors.
Syntax
Parameters
1
2
TRAC
:REF
numeric_value
:DEF
:DUR
Space
?
Item Description/Default Range of
Values
numeric_value Reference levels to be used in calculation of pulse duration 0 to 100
DEF
To Next Page
Loading...
