SERVice Subsystem 15
N1911A/1912A P-Series Power Meters Programming Guide 727
SERVice:SENSor[1]|2:TYPE?
This query identifies the sensor type connected to the power meter input
channel(s). For Agilent 8480 Series Sensors, either “A”, “B”, “D”, or “H” is
returned. For P- Series, E- Series and N8480 Series sensors, the model
number stored in EEPROM is returned
Syntax
Example
Error Messages
• If no sensor is connected, error –241, “Hardware missing” occurs.
SERV:SENS2:TYPE? This query returns either, “A”, “B”, “D”, or
“H” if an Agilent 8480 Series sensor is
connected to Channel B, or the sensor
model number if an P- Series, E- Series or
N8480 Series sensors is connected to
Channel B.
To Next Page
Loading...
