13 TRACe Subsystem
640 N1911A/1912A P-Series Power Meters Programming Guide
TRACe[1]|2:UNIT <character_data>
This command sets the units for the trace for the specified channel
Syntax
Parameters
Example
This command is included for compatibility purposes only. It has the same purpose as
[SENSe[1]]|SENSe2:TRACe:UNIT <character_data>, which should be the
preferred command.
TRAC
:UNIT
Space
character_data
?
1
2
Item Description/Default Range of Values
character_data • DBM: dBm
•W: Watts
DBM
W
TRAC2:UNIT W This command sets the trace units for
Channel B Watts.
To Next Page
Loading...
Need help?
General
