EasyManua.ls Logo

Agilent Technologies N1911A

Agilent Technologies N1911A
803 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 SENSe Subsystem
440 N1911A/1912A P-Series Power Meters Programming Guide
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:TIME <numeric_value>
This command sets the length of the time- gated period (time- gate length)
for time- gated measurements for the P- Series and E9320 sensors which
are set to NORMal mode. To set an E9320 sensor to NORMal mode, refer to
the command “[SENSe[1]]|SENSe2:DETector:FUNCtion
<character_data>” on page 410.
Syntax
Parameters
Example
Item Description/Default Range of Values
numeric_value The length of the time gated period in seconds.
DEF: the default value is 100 µs
Units are resolved to 1 ns.
0 to 1 second
DEF
SENS2:SWE3:TIME 0.001 This command sets the length to 0.001
seconds.
SENS
1
:
TIME
SENS2
:
numeric_value
DEF
Space
SWE
?
1
2
3
4

Table of Contents

Other manuals for Agilent Technologies N1911A

Related product manuals