Agilent Technologies N1911A Programming Guide

17 IEEE 488.2 Command Reference
748 N1911A/1912A P-Series Power Meters Programming Guide
*RCL <NRf>
The *RCL <NRf> (ReCaLl) command restores the state of the power meter
from the specified save/recall register. An instrument setup must have
been stored previously in the specified register.
Syntax
Parameters
Error Message
• If the register does not contain a saved state, error –224, “Illegal
parameter value” occurs.
Type Description/Default Range of Values
NRf The number of the register to be recalled. 1 - 10
*RCL
NRf
Space

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English