16 UNIT Subsystem
734 N1911A/1912A P-Series Power Meters Programming Guide
Parameters
Example
Reset Condition
On reset, all windows/measurements are set to DBM.
Query
UNIT[1]|2|3|4:POWer?
The query returns the current setting of the power measurement units.
Query Example
Item Description/Default Range of Values
amplitude_unit The measurement unit.
• The default unit is dBm
W
DBM
UNIT1:POW DBM This command sets the power
measurement units for the upper
window/upper measurement.
UNIT2:POW? This command queries which
measurement units are being used on the
lower window/upper measurement.
To Next Page
Loading...
Need help?
General
