TRIGger Subsystem 14
N1911A/1912A P-Series Power Meters Programming Guide 645
Many of the above commands contain a numeric which represents a
channel number. For example TRIGger1 and TRIGger2 represent Channel
A and Channel B respectively. Channel B commands cannot be used with
the single Channel N1911A power meter and result in the error “Header
suffix out of range.”
:AUTO <boolean> page 673
:SLOPe <character_data> page 675
[:SEQuence[1]|2]
:COUNt <numeric_value> page 677
:DELay
:AUTO <boolean> page 680
:IMMediate [no query] page 682
:SOURce BUS|EXTernal|HOLD|
IMMediate|INTernal[[1]|2]
page 683
Keyword Parameter Form Notes Page
To Next Page
Loading...
