3
1. Do not use on devices that require high safety and stability (ex: nuclear energy
systems, power supply, medical devices, aircraft control devices, combustion
devices, automobiles, riding, moving parts, etc.)
It may cause a fire, human injury or property loss.
2. For trains, ships, various safety devices, security devices, medical devices not
directly related to life, and for applications that require reliability and safety,organize
an alternative circuit by error-preventive design for overall system device.
It may cause a fire, human injury or property loss.
3. In case using the Graphic Panel touch switch for controlling, do not use the
switch as an emergency switches or those related to safety that may cause
physical injury or property damage in the event of a malfunction.
It may cause a fire, human injury or property loss.
4. In case controlling other devices through Graphic Panel telecommunication,
and there is a possibility of malfunction due to telecommunication error, an
alternative circuit must be constructed.
It may cause a fire, human injury or property loss.
5. Do not use the product in an area or an environment not specified in the manual.
It may cause a fire, human injury or property loss.
6. Do not connect, inspect or repair when power is on.
It may cause a fire or give an electric shock.
7. Do not disassemble the case. Please contact us if it is required.
It may cause a fire or give an electric shock.
8. Please use the rectified power with insulation trans.
It may cause a fire or give an electric shock.
9. Do not use the power exceeded the rated voltage.
It may cause a fire or give an electric shock.
10. Lithium battery is used in this product, do not disassemble or burn up.
It may cause an explosion or a fire.
11. Wire properly after check power terminal polarity.
It may cause a fire or a malfunction.
Warning
To Next Page
Loading...
Need help?
General